TNT Lift Systems Oil Change

USE MOBIL DTE_24 OIL ONLY - Available from TNT or W.W. Grainger

1. Put lift in the down position
2. Remove hoses from the “A” side of the pump.
   Put the hose ends in an empty 2 gal can.
3. Raise lift. (The platform will NOT move, as the oil will be going into the bucket)
4. Replace hoses and fill reservoir. Run the lift up and down.
5. Repeat steps 1 thru 4.
6. Check oil level with the lift in the up position.

Oil change is complete.

NOTE: While our FAQs are here to help you find the answers you are looking for, we are always available to help you. If you need assistance, please call us at the numbers listed below.